Tag Archive for Jobsite Safety

Why There Are Wind Speed Ratings on Mobile Elevating Work Platforms

-There are specific hazards associated with operating Mobile Elevating Work Platforms (MEWPs). Many of these hazards are already identified by the manufacturer and listed in the Operator’s Manual for each model. One of the identified hazards is machine tip-over, and wind speed can be a contributing factor (except for indoor-only rated machines).   All outdoor-rated…

Benefits of Having a Rear Proximity Alarm on your Telehandler

Beep… beep… It’s a familiar sound on any construction site meant to warn others that a piece of construction equipment is backing up. A standard feature that has been installed on telehandlers for more than a decade, back-up-alarms help surrounding bystanders and personnel with identifying when a telehandler is going to reverse direction. With the…

Big Changes, Little Changes Are Coming

In addition to the terminology and language changes in the new ANSI A92 and CSA B354 standards, which are projected to go into effect toward the middle of 2018, the standards also include several big changes to the equipment itself. New features, such as Platform Load Sense and Dynamic Terrain Sensing, will be incorporated into…

OSHA Set to Increase Fines, Inspections – How Does It Affect Your Rental Business?

For the first time in 25 years, fines levied by the Occupational Safety and Health Administration (OSHA) will increase, under a provision in the new budget deal President Obama signed into law on November 2, 2015. Since the Federal Civil Penalties Inflation Adjustment Act of 1990, OSHA was exempted from increasing its penalties to account for…

What’s that Decal Say?

Equipment decals: The cool, informative and potentially life-saving ink found on all aerial work platforms. They aren’t just positioned haphazardly all over the machine, and they aren’t there just to look pretty. Like your buddy’s ink, they have meaning, and the placement of equipment decals is carefully considered and critical to proper machine operation and…

National Safety Stand-Down 2017: 10 Safety Tips for Operating Aerial Work Platforms on the Jobsite

At Genie, our number one priority is to provide safe, productive aerial work platforms for our customers. Once the equipment is in the field, operators must follow the prescribed operating practices outlined in our manufacturer’s recommended guidelines to keep the equipment working safely and productively. The best way to reduce the risk of incidents from…

Maintenance Tips for Your Tier 4 Final Aerial Work Platforms

After decades of preparation, aerials with Tier 4 Final engines are beginning to find their way into your rental fleets. As you probably know, the Environmental Protection Agency (EPA) outlined a tiered series of emissions regulations for off-road engines in equipment in the mid-1990’s. Tier 4 Final (T4F) is the culmination of the EPA’s mandate,…

Genie Cable Rope

Updated Cable Replacement Protocol for Genie® Boom Lifts

With rental equipment constantly going out and coming in, less time in the shop translates to more time out on rent. To help fleet owners save money and simplify maintenance procedures, Genie has revised its protocol for cable replacement on its cable-operated telescopic booms — the Genie® S™-60/S-65, S-80/S-85, S-100/S-125, SX-135 XC™, SX-150 and SX-180…